Shot 2 Practicality and Performance.
Tecno- 3 Push Flex – The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and significantly improves the feeling of closure. Equipped with a smaller support surface on the tongue of the shoe, with a central flexing system, it manages to accompany the different needs and conformations of various cyclists, without creating areas of hyper pressure. It guarantees micrometric adjustment, tension closing / release speed and is replaceable.
Reflex Adjustable Heel Retention Device – The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable. For additional security while pedaling, the new Adjustable Heel Retention Device is provided with reflex inserts for more visibility in dark conditions.
Sidi Intergrated Heel Cup – An all new design and light, reinforced to avoid deformation after prolonged efforts and pressures. Anatomically shaped, it stabilizes and supports the foot when pedalling. The reflective inserts on the heel provide greater safety to the athlete on the road, helping to signal the presence of the cyclist in conditions of poor visibility.
C-Boost SRS Sole – Made of the latest generation carbon, thanks to the special conformation of the metatarsal area, it increases the transmission of power directly on the pedals, guaranteeing ideal power transfer and support. The new oval holes extend the adjustment the position of the cleat by ± 5 mm of a millimetre scale is included for remembering the riders personal cleat position
Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking. The SRS inserts are integrated by ventilation holes that promote the circulation of air inside the sole with each pedal stroke.
Maasure your foot by following these steps:
- Put a sheet of paper on the floor with the short side against the wall.
- Put the sole of your bare foot on it with the heel pressing against the wall
- Mark the point in front of the tip of your longest toe on the sheet of paper.
- Measure the distance between the margin of the sheet of paper where you placed your heel and the point where you made the mark. Always round up the measurement to the next millimetre.
You may find that your right and left foot are different lengths. Always measure both of them and use the longest measurement as your reference.
If you are undecided between two sizes after consulting the table, we recommend that you opt for the larger size.