Performance and style redefined once again as Bont Cycling deliver the Vaypor S straight from the disco and onto the feet of Bont Pilots around the world.
Designed for speed and comfort, the Vaypor S continues to raise the standard of professional-level road cycling shoes. The Vaypor S flagship cycling shoe has been further refined to improve on Bont Cycling’s industry-leading performance and fit. Designed to meet the rigours of the WorldTour and built for those who demand the finest, the Vaypor S provides the most anatomically and biomechanically correct platform currently available to ensure the most efficient and comfortable ride of your life.
Bont adds structural medial longitudinal arch support in all of their models to prevent over pronation. Bont believes that over pronation is a big cause of knee injuries as the incorrect tracking of knees while in the riding position can cause rotation of the tibia and femur. This can also cause the pelvis to tilt, resulting in lower back strain. By adding extra support in this key area, they make shoes that allow you to perform longer, with less risk of injury. They also offer a unique foot shape on their shoes, which allows more breathing room for your forefoot and toes; Bont aim to reduce ‘hot spots’ so your foot functions in the most efficient and anatomically correct position. This technology allows your pedaling force to spread across a greater surface area, creating better impact and fantastic performance.
Bont’s cycling shoes are the most heat moldable shoes available. Bont’s proprietary resin has been developed and perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. Unlike other shoes which are moldable only in select locations, all Bont cycling shoes are able to be molded over the entire chasis providing cyclists not only with the most anatomically designed cycling shoe on the market today, but also with the ability to fine tune the fit of the entire shoe to give a customised fit.
Read the Cyclingtips review of Bont’s Vaypor S shoe
Fully heat moldable 100% carbon monocoque chassis – hand laid unidirectional carbon plus Bont heat molding technology
Microfiber hologram style upper & suede leather liner.
Frontal area air vents
Two regular widths: Standard and wide.
Two built to order widths: Asian and narrow.
|Stack Height||3.6mm stack height for improved stability and injury prevention.|
|Inner Sole||EVA thermo-moldable with built-in inner padding.|
|Sole Guards||Replaceable heel and toe guards.|
|Padding||Closed-cell memory foam.|
|Cleat Mounting||Standard 3-hole road pedal configuration with alignment grid and grip.|
|Closure System||Dual-dial BOA IP1 Performance Fit system.|
|Weight||230 grams (approximate weight based on size 42 shoe).|
To find your size, place a piece of paper on a flat surface and place it directly up against a wall. Stand on the paper and ensure you have a 1mm gap between your heel and the wall. Plant your foot firmly on the ground and slowly roll your weight forward and onto the forefoot. For the most effective longest toe measurement, your heel should lift off the ground slight. Look down and take the measurement from the wall edge of the paper to your longest toe. Record the length. With your foot still in place, mark the widest points of the inner and outer edges of your feet. Measure the width across the widest part of your foot and record the number in millimeters. Repeat this step for both feet.
Once the measurements have been taken, use the Foot Length Range on the size chart to find your size. The Last Length measurements shown on the chart are the exact length of the last that we use to build the shoes. This correlates to the precise internal measurement of the shoe.
Following selection of your size in EU or USA, move downward to select the most appropriate width. We recommend adding 1mm to find the most appropriate width. For example, you are looking at a Vaypor S and have determined your best shoe size is 45 and your feet measure 105mm (left) and 107mm (right) wide, with an additional 1mm added, you would still fit within the Standard Range. If your feet measure wide than 109/110mm (size 45/10.5) you should consider Wide fit.
|Bont Cycling EU||36||37||38||39||40||40.5||41||42||42.5||43||44||44.5||45||46||46.5||47||48||49||50|
|Bont Cycling USA||4||4.5||5||6||6.5||7||7.5||8||8.5||9||9.5||10||10.5||11||11.5||12||12.5||13||14|
|Foot Length Range||216-220||221-225||226-230||231-235||236-240||241-245||246-250||251-255||256-260||261-265||266-270||271-275||276-280||281-285||286-290||291-295||296-300||301-305||306-310|
|Double Wide Range||98-102||99-103||101-105||102-106||104-108||105-110||107-111||108-113||110-115||111-116||113-118||114-119||116-121||117-122||119-124||120-125||122-127||122-127||125-130|
Important: Be advised all measurements shown in the size chart above are listed in millimetres and refer to all current models purchased after 2015. For customers looking to replace shoes purchased prior to 2015, please refer to our sizing chart to find the most accurate size.